FAQ

Frequently asked Questions:

Here you will find the most frequently asked questions about the installation and operation of the PinLED boards. You are welcome to contact me if you cannot find an answer to your question here. This area is constantly expanding, so over time there will be more and more questions and answers.

WPC CPU board

Question: I installed the new PinLED WPC CPU board in my pinball machine. After switching on, the error message always comes up that the pinball machine has set to the factory data.

WPC Driver Board

Question: I installed the new PinLED WPC Driver Board in my pinball machine. After the pinball is switched on the flipper enable relay on the WPC Driver Board switches on and drops out again immediately. This process repeats itself over and over again, creating a rasping sound.

Dotmatrix Controller Board

Question: There is an empty socket on the board. Do I have to equip it?

Question: How do I set the DIP switches for the display voltage?

WPC 95 driver board

Question: I have installed a new PinLED WPC 95 driver board in my pinball machine. After switching on, the row of lamps 1 lights up continuously. The row driver T9 is short-circuited.

WPC / WPC 95 driver board

Question: Why do “ghost lights” occur when using LEDs instead of normal pinball bulbs?

Data East / SEGA Solid State Flipper Board

Question: I installed the new PinLED Solid State Flipper Board in my pinball machine. How do I set the DIP switches?

Williams System 7 and 9 display set

Question: After installing the PinLED display set, the last two digits in every player display do not work. What can I do?