Please choose your currency:
Search
Please choose your country:   Deutsch Englisch Französisch
Product Information
Previous product Product 2 of 4 Next product in category Dotmatrix Displays  Dotmatrix Displays
PinLED Dotmatrix Display 128x16

PinLED Dotmatrix Display 128x16

100% - 5 of 5 stars! 1 Review(s)
Delivery time 4-7 working days:
 Delivery time 4-7 working days
Product Number:  20001
PinLED
Price: 239,00 €
[incl. 19% VAT plus shipping costs]
Qty:   

Data East
128x16 LED Dot Matrix Display

Fits the following pinballs:

Hook, Batman, Star Trek 25th Anniversary,
Teenage Mutant Ninja Turtles, Checkpoint

 

Installation guide for the PinLED Display-Set 20001
16x128 Dot Matrix Display for Data East pinballs

Now we want to show how easy installation can be....if you have any further questions - please let us know.... Our support@pinled.de will help you if you have any troubles.
If you follow the steps the installation is very easy and safe.
1. Unplug the mains plug.
2. Open the Backbox.
3. Put the Display / Speaker Panel on the playfield cover glass.
4. Disconnect the cables from the original display.
5. Remove the four nuts of the old display. You will need them later to mount the new display.
6. Remove the old display.
7. The new PinLED LED Dot Matrix Display doesn't come with the EPROM.  You have to change the old one to the new PinLED Display. Place the two Displays faced down in front of you. You can see the EPROM in its socket. It is the IC with the label on the back. Carefully pull the EPROM out of the socket (without bending the legs). You can use a tweezers for this job. On the one end of the EPROM you can see a little notch. This notch or hollow is the indication for the first pin of the EPROM. The socket on the new Display Board has also a little notch. When you put the EPROM in the socket please make sure that these two notches are lined up properly. If you put it in the wrong way the EPROM will damage after you turn on the pinball machine. If you are ready now put the EPROM in the socket of the new Display Board. Please check that all legs are lined up properly and that are also all leg are in the socket! The earlier versions of the Data East machines like Check Point use smaller EPROMs. There are two EPROMs possible - 27c010 and 27c512 (27c010 => 32 legs / 27c512 => 28 legs). If your machine use the bigger version you shell not have any trouble to put the EPROM in. But if your machine use the smaller version please make sure that the EPROM is lined up to the other end of the socket. That means the first two pins of the socket have to be released. You can see a decal on the board that describes this. 
8. Get the new PinLED Display into a suitable position in the Display / Speaker Panel.
9. Take the four plastic washer which are included in the PinLED Display-Set into a suitable position.
10. Mount the display with the four nuts
11. Connect the cables from the Data East Control Board to the new display. It is not possible to mix them up! The red wire on the flat cable is then on the right (to the middle of the new board).
12. Remove the high voltage fuses on the power supply board. This is only to be on the safe side. The new displays will also work with installed fuses. But the high voltage is not any longer in use after the conversion to PinLED Displays.
13. Reinstall in the Display / Speaker Panel.
14. Install the Backglass again.
15. Connect the mains plug.
16. That's it! Switch on the pinball and enjoy playing in new dimensions.....

5 of 5 Stars!robert c., 08/26/2012
hi , just got my pinled 20001 dotmatrix display and it works fantastic. thank you pinled they r worth getting. Rob

Average rating:
Would you like to add your review?
 Write Review 

All smartphone infos:

Scan and go. Get all this information on your smartphone.

www.PinLED.de Customers who bought this product also purchased

PinLED Display 6-digit
PinLED Display 6-digit
44,95 €
[incl. 19% VAT plus shipping costs]
Williams Funhouse WPC Display
Williams Funhouse WPC Display
219,00 €
[incl. 19% VAT plus shipping costs]
Pinball LED T10 ww
Pinball LED T10 ww
0,59 €
[incl. 19% VAT plus shipping costs]
Data East Robocop PinLED Display
Data East Robocop PinLED Display
199,00 €
[incl. 19% VAT plus shipping costs]
Pinball LED T10 bue
Pinball LED T10 bue
0,59 €
[incl. 19% VAT plus shipping costs]
WPC-S CPU Board
WPC-S CPU Board
159,00 €
[incl. 19% VAT plus shipping costs]
 

Last viewed products

Gorgar Playfield Plastic Set
Gorgar Playfield Plastic Set
149,00 €
[incl. 19% VAT plus shipping costs]
Elvira an the Party Monsters Playfield Plastic Set
Elvira an the Party Monsters Playfield Plastic Set
189,00 €
[incl. 19% VAT plus shipping costs]
Alien Poker Playfield Plastic Set
Alien Poker Playfield Plastic Set
159,00 €
[incl. 19% VAT plus shipping costs]
Strikes & Spares Playfield Plastic Set
Strikes & Spares Playfield Plastic Set
159,00 €
[incl. 19% VAT plus shipping costs]
Flipper LED T10 ww
Flipper LED T10 ww
0,59 €
[incl. 19% VAT plus shipping costs]
Flipper LED T10 rouge
Flipper LED T10 rouge
0,59 €
[incl. 19% VAT plus shipping costs]
My account
My orders
My invoices
Conditions
Revocation terms
Privacy
Shipping
Payment
Contact
Imprint

Dieser Shop wurde vollstnding mit store-systems.de
B2C Shop Pro 7.0 implementiert
Alle Rechte vorbehalten
Alle Preise inkl. MwSt. zzgl. Versandkosten 

Shopsystem u. Shopsoftware von store-systems.de

1146 - Table 'pinledStoreSystems.user_tracking' doesn't exist

insert into user_tracking (customer_id, full_name, session_id, ip_address, time_entry, time_last_click, last_page_url, page_desc) values ('', 'Guest', 'kc57cf533kkdnbjin15aopvjo5', '54.144.82.216', '1542485149', '1542485149', '/product_info.php?products_id=30&osCsid=kc57cf533kkdnbjin15aopvjo5', 'PinLED Dotmatrix Display 128x16')

[TEP STOP]